OptiFlex
>OptiFlex SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
The OptiFlex is Kern’s flagship high performance laser system. The HyperDual motion package installed on the OptiFlex is setting the standard for large format laser cutting and engraving machines. This improved motion system features a rack and pinion design and powerful servo motors at each side of the laser table. Cut acceleration rates are up to three times faster with a 100% increase in top end vector speed. The X axis has also been upgraded with twin linear rails and a thicker steel reinforced belt.

All Kern lasers are 100% designed and manufactured in the USA.

OPF50: Includes a 52" x 50" (1320 x 1270mm) engraving area

OPF100: Includes a 52" x 100" (1320 x 2540mm) engraving area

OPF60120: Includes a 60" x 120" (2525 x 3050mm) engraving area

OPF80120: Includes a 80" x 120" (2032 x 3050mm) engraving area




KERN LaserCELL
>LaserCELL SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
Kern’s LaserCELL is an enclosed, high performance laser cutting and engraving system. The Class 1 safety enclosure allows the system to be placed in high traffic areas such as busy factory floors and university classrooms.

All Kern lasers are 100% designed and manufactured in the USA.

LC50: Includes a 52" x 50" (1320 x 1270mm) engraving area




HSE Laser System
>HSE SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
The HSE Laser System is Kern’s entry level large format model. A wrap around gantry traverses over the cutting bed allowing for finished parts to be easily removed at all sides of the machine. The moving gantry features high speed servo motors and a flying optics beam delivery providing consistent beam power and quality over the entire work area. The HSE machine is well known as a highly productive laser system offered at an economical price.

All Kern lasers are 100% designed and manufactured in the USA.

HSE50: Includes a 52" x 50" (1320 x 1270mm) engraving area.

HSE100: Includes a 52" x 100" (1320 x 2540mm) engraving area


KERN MICRO24 2 large
>MICRO SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
The small format MICRO Laser System is an entry level machine with all the same capabilities of the larger systems offered by Kern. The class IV, open bed design gives you the control and ease of use that many enclosed systems lack. The X axis features the same high-speed engraving as our HSE model and the Y axis is a moving table that increases the accuracy and speed while cutting. Like all Kern systems the MICRO is a turnkey package including the computer, software and downdraft vacuum system.

All Kern lasers are 100% designed and manufactured in the USA.

MICRO24: Includes a 24" x 24"(610 x 610mm) engraving area (Available with or without stand)

MICRO48: Includes a 48" x 24" (1220 x 610mm)engraving area (Available with or without stand)

 
KERN Z12 large
>Z12 SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
The Z12 Monument Etching System offers a greater level of detail than has ever before been available to the stone etching industry. The solid steel frame and extra high gantry is designed to handle heavy stones up to 12" thick. The wrap around gantry and roller bed make loading and unloading stones quick and easy.

All Kern lasers are 100% designed and manufactured in the USA.

Z12: Available with;
  • 52" x 50" (1320 x 1270mm) engraving area
  • 52" x 100" (1320 x 2540mm) engraving area


 
KERN DHS100 large 
>DHS SERIES 
Laser-Cutting-small Laser-Marking-small Laser-Engraving-small
The Kern DHS (Dual Head Laser) system is equipped with dual laser heads to double your production. KCAM laser software will control each laser separately so both can be tuned to equal power. The slave laser connects to the master laser via an adjustable bar. The bar can be removed and the slave laser can be locked to the far right of the gantry allowing the master laser with full use of the laser table.

All Kern lasers are 100% designed and manufactured in the USA.

DHS50: Includes a 42" x 50" (1070 x 1270mm) engraving area.

DHS100: Includes a 52" x 100" (1320 x 2540mm) engraving area

DHS60120: Includes a 60" x 120" (1520 x 3050mm) engraving area

DHS80120: Includes a 80" x 120" (2030 x 3050mm) engraving area

 
Copyright © Alfex CNC Australia 2014. All Rights Reserved - Alfex CNC is one of Australia’s leading supplier of laser cutting, engraving, marking machines & CNC Routers.
 
accreditation2accreditation3
Proud members of:
aravisaamtil