FIBERMARK LASER SERIES
FIBERMARK LASER SERIES - METAL AND PLASTIC LASER MARKING SYSTEM
The Fibermark Laser Series is Epilog's metal and plastic marking laser system. Using a fiber laser source, the FiberMark system allows you to etch metal and engineered plastics with bar codes, logos and text. Print to the laser from a logo, drawing or even a scanned photograph. The large format 610mm x 305mm work area offers a fast, inexpensive way to mark your parts and tools.
Read the Engraver's Journal review of the FiberMark laser system by Steve Spence.
The FiberMark is 100% designed, engineered, and built in the USA.
FIBERMARK
The Advantages of Fiber Laser Etching:
- The laser uses a beam of light as the engraving tool, so no part of the machinery actually touches the material being engraved.
- Non-contact laser etching causes no stress to part.
- The Fiber Laser technology is about 30% less than traditional Nd:YAG systems.
- Open-architecture software compatibility allows you to print out of most Windows software packages.
Epilog manufactures a full line of lasers to meet your engraving, cutting and marking needs. With a complete line of fiber and CO2 lasers, we’re sure we can provide a laser system that is right for your application. The decision to select a fiber laser over a CO2 will be determined primarily by what materials you need to mark. A fiber laser system will mark bare metals, ceramics and engineered plastics, whereas a CO2 laser system can engrave a wider variety of materials, including wood, acrylic, rubber, plastic and more. If you will be working mostly with metals and part marking, the FiberMark is the right choice for you. The wavelength of the fiber laser allows it to mark directly onto metal and engineered plastics, but not organic materials such as wood and acrylic.
| | FiberMark
Flying Optics System |
|---|
| Laser Type |
Ytterbium Fiber Laser (air cooled) |
| Laser Power |
10, 20, 30, or 50 watts pulsed |
| Wavelength |
1062 nm |
| Mode of Operation |
Pulsed 20-80 kHZ |
| Repetition Rate (Frequency) |
20 kHz - 100 kHz depending on laser wattage |
| Beam Quality |
M2 < 1.1 |
Focal Length
(F-Theta Lens) |
3" (76.2 mm) |
| Marking Area |
24" x 12" (610 x 305 mm) |
| Maximum Material Thickness |
5" (127 mm) |
| Laser Source |
Solid State Pulsed Ytterbium (Yb) Fiber Laser (air cooled, includes collimator). 20 or 30 watts |
| Output Power |
10, 20, 30, or 50 watts pulsed |
| Intelligent Memory Buffer |
Store unlimited files up to 64 MB. Rolling buffer allows files of any size to be engraved. |
| Air Assist |
Attach the included air compressor to our Air Assist to remove heat and combustible gasses from the cutting surface by directing a constant stream of compressed air across the marking surface. |
| Laser Dashboard |
The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages |
| Red Dot Pointer |
Since the laser beam is invisible, the Red Dot Pointer on Epilog's FiberMark Laser allows you to have a visual reference for locating where the laser will fire |
| Relocateable Home |
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the FiberMark Laser. |
| Operating Modes |
Optimized raster, vector or combined modes |
| Motion Control System |
High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning. |
| X-Axis Bearings |
Ground and polished stainless steel NeverWear™ Bearing System. |
| Belts |
Advanced B-style Kevlar Belts |
| Resolution |
User controlled from 75 to 1200 dpi |
| Speed and Power Control |
Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color. |
| Print Interface |
10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7 |
| Size (W x D x H) |
34.5" x 24.5" x 16"
(876 x 622 x 406 mm) |
| Electrical Requirements |
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC |
| Ventilation System |
External exhaust to the outside is required via single 4" (101.6 mm) output port. |
CONTACT US NOW TO RECEIVE AN INFORMATION PACK -
Including the latest brochure, our guide to starting your own laser engraving business and a laser engraved sample.
Click Here
