> Epilog Fusion M2 40

The Fusion M2 Series is Epilog’s most advanced concept in laser system design. Features include a oversized 40" x 28" (1016mm x 711mm) engraving area (Epilog's largest), Epilog’s new standard for Motion Control design, Job Management Software, the industries highest quality flame-polished edge cuts, Large viewing door with LED lighting, 13.25” (336mm) max material height and Epilog’s highest engraving and cutting speeds yet!

This machine was designed to engrave the same high-quality image at any point on the table by utilising our top-of-the-line motion control system and industry-leading optics system.

All Epilog Laser Systems are 100% designed, engineered and built in the USA.

Technical Data Fusion M2 40

 Engraving AreaMaximum Material ThicknessLaser Wattage

Size(W x D x H)


Laser Source

Intelligent Memory CapacityAir Assist

Laser Dashboard

Red Dot Pointer

Relocateable Home

Operating ModesMotion Control SystemX-Axis BearingsBeltsResolutionSpeed and Power Control

Print InterfaceElectrical Requirements

Ventilation System

Maximum Table Weight

Fusion M2 40 40" x 28" (1016 x 711 mm) 13.25" (336 mm) CO2: 30, 40, 50, 60, 75, or 120 watts
Fiber: 30 or 50 watts

Dual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts
60.5" x 41.25" x 42.25"
(1537 x 1048 x 1073 mm)
43" (1092 mm) deep with exhaust plenum.
643 lbs (292 kg)
Dual Source: 679 lbs (308 kg)
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular,
permanently aligned and field replaceable.
Multiple file storage up to 128 MB.  Attach an air compressor to our included Air Assist to remove heat and combustible
gases from the cutting surface by directing a constant stream of compressed air
across the cutting surface.
The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of
software packages - from design programs to spreadsheet applications to
CAD drawing packages.
Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you
to have a visual reference for locating where the laser will fire.
When engraving items that are not easily placed at the top corner of the laser, you can
set a new home position by hand with the convenient Movable Home Position feature on
the Fusion Series Lasers.
Optimised raster, vector or combined modes. High-speed Brushless DC Servo Motors. Ground and polished stainless steel Long-Lasting Bearing System. Kevlar (x-axis) and Steel Cord (y-axis) belts. User controlled from 75 to 1200 dpi. Computer or manually control speed and power in 1% increments to 100%.
Vector color mapping links speed, power and focus to any RGB color.
10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10. Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz,
single phase.
650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required.
There are two output ports, 4" (102 mm) in diameter.
Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting

Copyright © Alfex CNC Australia 2014. All Rights Reserved - Alfex CNC is one of Australia’s leading supplier of laser cutting, engraving, marking machines & CNC Routers.
Proud members of: